Druckerpatronen, Tintenpatronen, Tinte und Toner

Refill instruction for
Canon printer cartridges

 
Cartridge BCI-201: BJC 600 / 600E / 600J / 600S / 610 / 610JW / 620JW / 680

Cartridge BCI-3 / BCI 3e : BJC 3000/ 6000 / 6300 / 6500 / S400 / S450 / S500 / S520 / S530 / S600 / S630 / S750 / S800 / Smartbase MPC400 / MPC600F / MP700 Photo / MP730 / Multipass C100 / i550 / i560 / i850 / i6500

Cartridge BCI-6: S800 / S820 / S820D / S830D / S900 / S9000 / BJC-8200 / i905D / i950 / i965 / i9100

Cartridge BCI-3 + BCI-3e + BCI-5 + BCI-6

Remove the cartridge from the printer.

Place the cartridge with the ink outlet holes facing upwards onto a non-absorbent surface.
Cover the outlet holes with adhesive tape.
On the cartridge you will see a coloured label matching the colour ink.
Scrape away the label furthest from the portion that has the name canon on it.
This will expose the original seal/plug.
Using the eye screw provided remove the plug/seal.
To remove a plug take the eye screw and push the plug into the ink tank.
To remove the seal use the eye screw to remove the seal.
Assemble the needle and syringe and fill with the 15cc of appropriate colour ink.

Insert the needle into the reservoir portion of the tank.

Slowly inject the ink.

Wipe away any overspill from the tank.
Reseal the cartridge with strong adhesive tape.
Allow the cartridge to stand for a few minutes.
Return the cartridge to the printer and run a cleaning/priming cycle as per your printer instructions.
Cartridge BCI-201

Remove the cartridge from the printer.
Place the cartridge onto a non-absorbent surface with the bottom of the cartridge facing upwards.
On the bottom of the cartridge you should see a ball-plug.
Note: If the ball-plug cannot be found at the bottom of the cartridge, it will be at the top under the label. The procedure for filling the cartridge is the same as filling from the bottom.
Using a ballpoint pen or similar, push the ball into the cartridge.
Assemble the needle and syringe and fill with14cc for high capacity or 9cc for standard black.

Insert the needle into the filling hole and slowly inject the ink.

Wipe away residual ink from the cartridge.
Reseal the filling hole with the plug provided and cover with tape
Allow to stand for a few minutes
Return the cartridge to printer and run a cleaning/priming cycle as per your printer instructions.
Blocked Cartridges
Place the blocked cartridge into ¼ to ½ inch of warm water.
Leave to stand for a few minutes.
When the ink begins to flow from the outlet holes, remove the cartridge from the water and dry with a soft cloth.
Return the cartridge to the printer and run the cleaning/priming cycle as per your printer instructions.
You may have to do this a few times until you regain the print quality.


Important : Always refill the cartridge as soon as the warning light sign is shown.
 
AGB  ||  Lieferkonditionen  ||  Impressum  ||  Widerrufsrecht  ||  Datenschutz  ||  Kontakt
Senden Sie eMail mit Fragen oder Kommentaren zu dieser Website an: webmaster
Copyright © 2008-2010 - W!GUD - Auf der Bünte 16 - 31737 Rinteln / Germany PAGERANK TOOLS

Wir bieten Ihnen Qualitativ hochwertige und günstige Tintenpatronen, Tinte, Druckertinte, Toner und Fotopapier.
Kleine Auswahl von Produkten insbesondere Druckerpatronen die Sie bei uns günstig kaufen können.
Alle Preise inklusive Mehrwertsteuer zzgl. Versandkosten. Preisänderungen und Irrtümer vorbehalten.
Alle auf unseren Webseiten genannten Geräte- und Zubehörbezeichnungen dienen lediglich der Anwendungshilfe.
® Alle Markennamen, Warenzeichen und eingetragenen Warenzeichen sind Eigentum Ihrer rechtmässigen Eigentümer und dienen hier nur der Beschreibung.
Sonstiges: Kredite ab 4,99% |